k8凯发

Welcome To ShenZhen Battery Electronic Co.,Ltd. Website!

HW-1088 Positioning Leakage Detection Module
HW-1088 Positioning Leakage Detection Module
Model:71×88×58.5mm
Update:2012-04-10
Hits:
可监控长达1500米的BTR水浸感应线,RS485接口,采用MODBUS RTU协议与监控系统通信
favorite
 
Description

Product Overview

    HW-1088 leak positioning monitoring module can be monitoring the BTR for 1500 meters Leach sensing line,once detect liquid, It will positioning leak position which displayed by LED and produce the sound-sight alarm. Also the position will be sent to the monitoring system by RS485 interface. HW-1088 adopts MODBUS RTU MODBUS RTU protocol to communicate with the monitoring system, so users can integrate the HW-1088 into different system conveniently.

 Function and Characteristics

         One way of sensing line interface, monitoring with 1500 meters induction line

         The alarm status is displayed by LED

         Four digital pipe display leak position

         Provide all relay modules, often open/closed switch alarm signal to expand the external alarm system

         As many as 40 alarm log storage space, convenient for users to inquires the historical alarms events

         12-30VDC / 9V - 25VAC wide range of working voltage

         Simple twisted-pair cable RS485 communication, Communication distance up to 1000 meters

         Software setup the communication address and parameters.

         The Convenient DIN guide installation way

Working Conditions

         Power: DC12V—DC30V/AC9V--AC25V     Power consumption less than 3W

         Working Temperature: Fahrenheit zero to 50 degrees Celsius

         Work Humidity: 10% ~ 90% RH; No condensation

         Atmospheric Pressure: 86 ~ 106 kpa

Technical Parameters

         Communicationparameters: 2400/4800/9600/19200bps, 1 stop bits, no parity bit, default 9600

    Communication Address:o-255, node number less than 32(default address 0).

    Positioning accuracy: cable of the presidents of plus or minus 0.6 meters 0.5%.

    Alarm Output: relay type,often open or closed; Open-circuit impedance more than 100 ohms; short-circuit impedance less than 100 ohms.

    Adherent point is pressure-proof: 30 volts direct current/1 ampere; 60 volts direct current/0.3 ampere; 125 volts direct current/0.5 ampere.

 
PreviousLeak monitoring line
NextHW-58 Leaking Sensor

Order

  • *
  • *
  • *
  •  Refresh
通话
短信
地图
首页
k8凯发